BAIA00ROU Site Information Form (site log v2.0)
International GNSS Service
See Instructions at:
https://files.igs.org/pub/station/general/sitelog_instr_v2.0.txt
0. Form
Prepared by (full name) : Geodesy and ROMPOS Service ([email protected])
Date Prepared : 2024-11-19
Report Type : UPDATE
If Update:
Previous Site Log : baia00rou_20240401.log
Modified/Added Sections : 11
1. Site Identification of the GNSS Monument
Site Name : Baia Mare
Nine Character ID : BAIA00ROU
Monument Inscription :
IERS DOMES Number : 11406M001
CDP Number : (A4)
Monument Description : STEEL MAST
Height of the Monument : 4.00 m
Monument Foundation : ROOF
Foundation Depth : (m)
Marker Description : (CHISELLED CROSS/DIVOT/BRASS NAIL/etc)
Date Installed : 2005-06-10T12:00Z
Geologic Characteristic : CONGLOMERATE
Bedrock Type : IGNEOUS
Bedrock Condition : WEATHERED
Fracture Spacing : (0 cm/1-10 cm/11-50 cm/51-200 cm/over 200 cm)
Fault zones nearby : NO
Distance/activity : (multiple lines)
Additional Information : The GPS station Baia Mare is located on
: the top of the County Office for Cadastre
: and Land Registration.
: This area represents a complex
: segment of the Neogene/Quaternary volcanic
: belt of the Inner Carpathians and borders the
: northeastern margin of the Panonian Basin.
2. Site Location Information
City or Town : Baia Mare
State or Province : Maramures
Country or Region : ROU
Tectonic Plate : EURASIAN
Approximate Position (ITRF)
X coordinate (m) : 3945840.108
Y coordinate (m) : 1720428.043
Z coordinate (m) : 4691082.500
Latitude (N is +) : +473906.42
Longitude (E is +) : +0233327.76
Elevation (m,ellips.) : 270.8
Additional Information : (multiple lines)
3. GNSS Receiver Information
3.1 Receiver Type : LEICA GRX1200PRO
Satellite System : GPS
Serial Number : 451105
Firmware Version : 1.31/2.120
Elevation Cutoff Setting : 5 deg
Date Installed : 2005-06-10T12:00Z
Date Removed : 2012-09-27T12:00Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.2 Receiver Type : LEICA GRX1200PRO
Satellite System : GPS
Serial Number : 451105
Firmware Version : 8.51/2.120
Elevation Cutoff Setting : 0 deg
Date Installed : 2012-09-27T13:00Z
Date Removed : 2012-10-01T11:00Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.3 Receiver Type : LEICA GRX1200PRO
Satellite System : GPS
Serial Number : 451105
Firmware Version : 8.51/2.127
Elevation Cutoff Setting : 5 deg
Date Installed : 2012-10-02T07:00Z
Date Removed : 2019-04-23T07:10Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.4 Receiver Type : LEICA GRX1200PRO
Satellite System : GPS
Serial Number : 451105
Firmware Version : 9.20/2.127
Elevation Cutoff Setting : 5 deg
Date Installed : 2019-04-23T07:20Z
Date Removed : 2020-03-20T07:14Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.5 Receiver Type : LEICA GRX1200PRO
Satellite System : GPS
Serial Number : 451105
Firmware Version : 9.20/2.127
Elevation Cutoff Setting : 0 deg
Date Installed : 2020-03-20T07:15Z
Date Removed : 2020-10-01T08:56Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.6 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL
Serial Number : 1834307
Firmware Version : 4.31/7.403
Elevation Cutoff Setting : 0 deg
Date Installed : 2020-10-01T11:31Z
Date Removed : 2020-11-05T09:10Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.7 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS+SBAS
Serial Number : 1834307
Firmware Version : 4.31/7.403
Elevation Cutoff Setting : 0 deg
Date Installed : 2020-11-05T09:30Z
Date Removed : 2021-05-19T16:48Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.8 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.50/7.710
Elevation Cutoff Setting : 0 deg
Date Installed : 2021-05-19T16:55Z
Date Removed : 2022-02-09T08:05Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.9 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.52/7.711
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-02-09T08:16Z
Date Removed : 2022-07-20T04:37Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.10 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.60/7.811
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-07-20T04:45Z
Date Removed : 2022-12-27T19:13Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.11 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.61/7.811
Elevation Cutoff Setting : 0 deg
Date Installed : 2022-12-27T19:17Z
Date Removed : 2023-07-18T04:17Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.12 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.70/7.813
Elevation Cutoff Setting : 0 deg
Date Installed : 2023-07-18T04:24Z
Date Removed : 2024-03-29T18:56Z
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.13 Receiver Type : LEICA GR50
Satellite System : GPS+GLO+GAL+BDS
Serial Number : 1834307
Firmware Version : 4.80/7.900
Elevation Cutoff Setting : 0 deg
Date Installed : 2024-03-29T19:04Z
Date Removed : CCYY-MM-DDThh:mmZ
Temperature Stabiliz. : (deg C) +/- (deg C)
Additional Information : (multiple lines)
3.x Receiver Type : (A20, from rcvr_ant.tab; see instructions)
Satellite System : (GPS+GLO+GAL+BDS+QZSS+IRNSS+SBAS)
Serial Number : (A20, but note the first A5 is used in SINEX)
Firmware Version : (A11)
Elevation Cutoff Setting : (deg)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Temperature Stabiliz. : (none or tolerance in degrees C)
Additional Information : (multiple lines)
4. GNSS Antenna Information
4.1 Antenna Type : LEIAT504 LEIS
Serial Number : 102187
Antenna Reference Point : BPA
Marker->ARP Up Ecc. (m) : 0.0000
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIS
Radome Serial Number :
Antenna Cable Type : COAXIAL
Antenna Cable Length : 30 m
Date Installed : 2005-06-10T12:00Z
Date Removed : 2020-10-01T08:56Z
Additional Information : (multiple lines)
4.2 Antenna Type : LEIAR20 LEIM
Serial Number : 23075019
Antenna Reference Point : BAM
Marker->ARP Up Ecc. (m) : 0.0000
Marker->ARP North Ecc(m) : 0.0000
Marker->ARP East Ecc(m) : 0.0000
Alignment from True N : 0 deg
Antenna Radome Type : LEIM
Radome Serial Number :
Antenna Cable Type : COAXIAL
Antenna Cable Length : 30 m
Date Installed : 2020-10-01T11:31Z
Date Removed : CCYY-MM-DDThh:mmZ
Additional Information : (multiple lines)
4.x Antenna Type : (A20, from rcvr_ant.tab; see instructions)
Serial Number : (A*, but note the first A5 is used in SINEX)
Antenna Reference Point : (BPA/BCR/XXX from "antenna.gra"; see instr.)
Marker->ARP Up Ecc. (m) : (F8.4)
Marker->ARP North Ecc(m) : (F8.4)
Marker->ARP East Ecc(m) : (F8.4)
Alignment from True N : (deg; + is clockwise/east)
Antenna Radome Type : (A4 from rcvr_ant.tab; see instructions)
Radome Serial Number :
Antenna Cable Type : (vendor & type number)
Antenna Cable Length : (m)
Date Installed : (CCYY-MM-DDThh:mmZ)
Date Removed : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
5. Surveyed Local Ties
5.x Tied Marker Name :
Tied Marker Usage : (SLR/VLBI/LOCAL CONTROL/FOOTPRINT/etc)
Tied Marker CDP Number : (A4)
Tied Marker DOMES Number : (A9)
Differential Components from GNSS Marker to the tied monument (ITRS)
dx (m) : (m)
dy (m) : (m)
dz (m) : (m)
Accuracy (mm) : (mm)
Survey method : (GPS CAMPAIGN/TRILATERATION/TRIANGULATION/etc)
Date Measured : (CCYY-MM-DDThh:mmZ)
Additional Information : (multiple lines)
6. Frequency Standard
6.1 Standard Type : INTERNAL
Input Frequency : (if external)
Effective Dates : 2005-06-10/CCYY-MM-DD
Notes : (multiple lines)
6.x Standard Type : (INTERNAL or EXTERNAL H-MASER/CESIUM/etc)
Input Frequency : (if external)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
7. Collocation Information
7.x Instrumentation Type : (GPS/GLONASS/DORIS/PRARE/SLR/VLBI/TIME/etc)
Status : (PERMANENT/MOBILE)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8. Meteorological Instrumentation
8.1.1 Humidity Sensor Model : PAROSCIENTIFIC MET3A
Manufacturer : PAROSCIENTIFIC
Serial Number : 93128
Data Sampling Interval : 60 sec
Accuracy (% rel h) : 2 % rel h
Aspiration : FAN
Height Diff to Ant : -5 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2004-08-20/CCYY-MM-DD
Notes : (multiple lines)
8.1.x Humidity Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy (% rel h) : (% rel h)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.2.1 Pressure Sensor Model : PAROSCIENTIFIC MET3A
Manufacturer : PAROSCIENTIFIC
Serial Number : 93128
Data Sampling Interval : 60 sec
Accuracy : 0.08 hPa
Height Diff to Ant : -5 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2004-08-20/CCYY-MM-DD
Notes : (multiple lines)
8.2.x Pressure Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (hPa)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.3.1 Temp. Sensor Model : PAROSCIENTIFIC MET3A
Manufacturer : PAROSCIENTIFIC
Serial Number : 93128
Data Sampling Interval : 60 sec
Accuracy : 0.1 deg C
Aspiration : FAN
Height Diff to Ant : -5 m
Calibration date : (CCYY-MM-DD)
Effective Dates : 2004-08-20/CCYY-MM-DD
Notes : (multiple lines)
8.3.x Temp. Sensor Model :
Manufacturer :
Serial Number :
Data Sampling Interval : (sec)
Accuracy : (deg C)
Aspiration : (UNASPIRATED/NATURAL/FAN/etc)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.4.x Water Vapor Radiometer :
Manufacturer :
Serial Number :
Distance to Antenna : (m)
Height Diff to Ant : (m)
Calibration date : (CCYY-MM-DD)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Notes : (multiple lines)
8.5.x Other Instrumentation : (multiple lines)
9. Local Ongoing Conditions Possibly Affecting Computed Position
9.1.x Radio Interferences : (TV/CELL PHONE ANTENNA/RADAR/etc)
Observed Degradations : (SN RATIO/DATA GAPS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.2.x Multipath Sources : (METAL ROOF/DOME/VLBI ANTENNA/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
9.3.x Signal Obstructions : (TREES/BUILDINGS/etc)
Effective Dates : (CCYY-MM-DD/CCYY-MM-DD)
Additional Information : (multiple lines)
10. Local Episodic Effects Possibly Affecting Data Quality
10.x Date : (CCYY-MM-DD/CCYY-MM-DD)
Event : (TREE CLEARING/CONSTRUCTION/etc)
11. On-Site, Point of Contact Agency Information
Agency : National Center for Cartography
: Geodesy and ROMPOS Service
Preferred Abbreviation : NCC
Mailing Address : Expozitiei Bvd. 1A
: 012101 Bucharest
: Romania
Primary Contact
Contact Name : Geodesy and ROMPOS Service
Telephone (primary) : +40 21 224 39 67
Telephone (secondary) : +40 758 071 894
Fax :
E-mail : [email protected]
Secondary Contact
Contact Name : Mr. Miluta Flueras
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail : [email protected]
Additional Information : (multiple lines)
12. Responsible Agency (if different from 11.)
Agency : (multiple lines)
Preferred Abbreviation : (A10)
Mailing Address : (multiple lines)
Primary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Secondary Contact
Contact Name :
Telephone (primary) :
Telephone (secondary) :
Fax :
E-mail :
Additional Information : (multiple lines)
13. More Information
Primary Data Center : BKG
Secondary Data Center : BKG
URL for More Information : https://rompos.ro/index.php/en/technical-info/ro
: mpos-cors-map
Hardcopy on File
Site Map : (Y or URL)
Site Diagram : (Y or URL)
Horizon Mask : (Y or URL)
Monument Description : https://rompos.ro/index.php/en/technical-info/ro
: mpos-cors-map/35-spgnss/5-baia
Site Pictures : https://rompos.ro/index.php/en/technical-info/ro
: mpos-cors-map/35-spgnss/5-baia
Additional Information : (multiple lines)
Antenna Graphics with Dimensions
LEIAR20
+-----+ <-- 0.1613
/ \
| |
+----------------+-----------+----------------+ <-- 0.1113 TCR
| |
| |
| |
| |
+-+---------------------------------------------+-+
+------------------+-----------+------------------+ <-- 0.0323 BCR
| |
| |
+----+ +----+ <-- 0.0013 BPA
+x+ <-- 0.0000 BAM=ARP
NOM=NRP
<-- 0.3200 -->
